Maybe there is a third-party software that can fulfill this kind of demand, and Windows does not work on its own. From the source machine 192.168.1. On 192.168.1.36 I can ping the loopback and the source machine. Therefore, if the PC accesses the Internet through the wireless network connection of the router and opens the wireless hotspot to share with other devices, the PC cannot access the network itself, nor can it ping its own IP, and other devices cannot connect to the hotspot. Im having trouble setting up static routing. So according to the above example, 192.168.1.1 and 192.168.131.1 are not directly communicable. From the article: If the ping fails, the remote host may not be responding, or there may be a problem with the network hardware. Enter the netcfg -d command and press Enter to run it. See PING parameters to fine-tune the PING command to get the most accurate results. Type cmd in Windows Search and click on Run as administrator under Command Prompt. For IPv6: PING ::1 or PING IPV6-LOOPBACK. 0.1, and pinging this address will always return a reply unless the firewall prevents it. GNS3 WorkBench, and create a cloud in GNS3 and associate it with your Eth0 adapter - this option works for a as well. To ping the loopback interface on your system to troubleshoot the problem, follow these steps: At the command line, type these commands: For IPv4: PING 127.0.0.1 or PING LOOPBACK. In a TCP/IP network, the loopback IP address is 127.0. If this doesnt work for you, you might want to try Option 2. For example, the changed IP address is 192.168.131.1, and other devices connected to the shared hotspot will be assigned these IP addresses: 192.168.131.** (** Indicates 2, 3, 4.), they connect to the external network through 192.168.131.1. and create a cloud in GNS3 and associate it with your Loopback adapter as in (a). Then, after creating the hotspot, Windows automatically changes the IP of the wireless network card. If the gateway of the original router is 192.168.1.1, the IP address obtained after the wireless network card is connected to the wireless network is 192.168.1.2, and the external network is connected through the gateway 192.168.1.1. The address is automatically generated by the system. After creating the hotspot, the IP of the wireless network is changed to another fixed IP address by Windows. The problem you mentioned should not occur.īut if the PC connects to the wireless network through the wireless router to access the Internet, then the PC creates a hotspot for other devices. Generally, a PC connects to the Internet through a network cable, and then creates a hotspot to share with other devices. Is our PC connected via a network cable or connected via a wireless router?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |